Braided Aramid Cord

(0) No Reviews yet
$60.00 to $85.00Each
An eight strand, tightly woven braided cord manufactured from high strength KEVLAR® 29 fibers. Used to reinforce curves, fortify corner joints, and solidify inlayed edges of formers.
Status: Active

Details

Description

Braided Aramid Cord is an eight strand, tightly woven cord manufactured from high strength KEVLAR® 29 fibers. The cord can be used to reinforce the inside and outside of compound curves, to strengthen comer joints or to stiffen the inlayed edges of formers.

It is compatible with polyester, vinyl-ester and epoxy resins and wets out easily. It can be cut with a sharp pair of composite shears.

KEVLAR® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company and are used with permission.

Technical

Typical Properties Test
.025" Diameter:
.025"-.028"
.035" Diameter:
.030"-.034"
.070" Diameter:
.065"-.070"
Construction:
8 Strand Braid
Material:
KEVLAR® 29
Physical Properties
.025" Tensile Strength:
110.2 lbs
.025" Elongation:
7.4%
.035" Tensile Strength:
235.3 lbs
.035" Elongation:
7.4%
.070" Tensile Strength::
619.4 lbs
.070" Elongation:
7.3%

Please note: All data to be used as a guide only; not a specification. KEVLAR® is a registered trademark of E.I. du Pont de Nemours and Company and is used with permission.

Data Sheets
Compatibility
  • Polyester Resins
  • Vinyl-Ester Resins
  • Epoxy Resins

Ratings & Reviews

No reviews available

Be the first to Write a Review