PRO-SET Infusion Hardener 210
Details
PRO-SET 210 Infusion Hardener is mixed with PRO-SET Resins to provide short pot life and cure time. PRO-SET 210 Infusion Hardener has a pot life of 32 minutes at 72°F. Approximate working time of 75 to 90 minutes at 77° F. A typical laminate will be gelled in 2 to 3 hours at 77° F. Not sold as a kit. Must order Resin in addition to one of the hardeners.
- Not sold as a kit. Must order a hardener in addition to the resin.
- Shipping: Domestic Shipping via Ground Only
⚠️WARNING: This product can expose you to chemicals including Benzene which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov
Technical
- Volume: 3.00 parts resin to 1 part hardener
- Weight: 3.65 parts resin to 1 part hardener
Please note: All data to be used as a guide only; not a specification. Tests are performed at @ 72°F x 4 weeks.
/PDS-Icon-18.png){kind=icon}
Product Data Sheet
Safety Data SheetResources
Tips on how to use this product in certain applications are coming soon.
If you would like to learn more about this product, give us a call at (800) 811-2009.
Shipping
Due to U.S. Department of Transportation Hazardous Materials regulations and International Air Transport regulations we can only ship this product by domestic ground service within the contiguous United States.
Limited Quantities are stocked to ensure maximum shelf life of material, please allow a 2-3 week lead time from the date your order is placed. If stock is availble it will ship within the standard 2-3 day processing time.
Clearance
Products sold as a clearance may be excess inventory that does not meet the stringent specifications of medical or aerospace applications, have blemishes and/or other imperfections as noted in the product descriptions. These items are sold "As Is", are nonrefundable and will not be backordered. If an ordered quantity cannot be fulfilled, we will ship available on hand quantities and automatically cancel any remaining balance.