Porous Teflon® Coated Fiberglass

(0) No Reviews yet
SKU: VC-TEF-P-38-100FR-P



Porous Teflon® Coated Fiberglass is fiberglass fabric coated with a thin Teflon® layer which forms a porous non- bondable fabric. Often used as the first barrier between the composite laminate and the rest of the vacuum bagging materials, Porous Teflon® Coated Fiberglass is used to control the resin content of a laminate when vacuum bagging.

When applied on top of a wet laminate and covered with Breather Cloth, excess resin is drawn through the porous material and blotted up by the Breather Cloth. The amount of resin removed is contingent upon the number of layers of Breather Cloth used. A lightly textured imprint of the woven fabric will remain on the surface of the laminate.

Porous Teflon® Coated Fiberglass can be used in conventional vacuum bagging, resin infusion and prepreg part manufacturing and is suitable in vacuum bagging applications up to 500°F (260°C).


Physical Properties
Woven E-Glass Fiberglass
Coating Medium:
Coated Weight
0.100-0.140 lbs/yd2
Shelf Life:
Technical Properties
Max Operating Temp:
Air Flow (range):
200-110 cubic ft/min
Breaking Strength Warp:
40 lbs/in
Breaking Strength Fill:
30 lbs/in
Tear Strength Warp:
5.3l bs
Tear Strength Fill:
4.0 lbs
Elongation @ Break:
Dielectric Strength:
41 volts/mil

Please note: All data to be used as a guide only; not a specification.

Ratings & Reviews

No reviews available

Be the first to Write a Review