EZ-Lam Tooling Resin - Room Temperature
Details
Description
EZ-Lam Room Temp Laminating Resin is a room temperature laminating resin for the construction of high strength fiberglass room temperature cure epoxy molds. This system is a low odor system that has excellent wet out characteristics. Its higher viscosity, compared to typical laminating resins, works well for contoured tools. It is designed for use with EZ-Lam Black Surface Coat.
When combined, the mixture provides a pot life of 30 minutes at 75°F. The surface coat will be fully cured in 24 hours at 75-80°F.
- Domestic Shipping via Ground Only
Technical
Physical Properties
Mix Ratio:
Weight: 100 parts A to 15 parts B
Pot Life:
150 gr. mass 30 minutes @ 75°F
Cure:
24 Hours @ 75-80°F
Gel Time:
3-4 Hours
Shelf Life:
Twelve months when stored in tightly sealed containers at room temperature.
Color:
Black
Technical Properties
Viscosity, Mixed:
3500 CPS
Durometer D:
88 Shore
Specific Gravity:
1.70 gm/cc
Tensile Strength:
5,500 psi
Flexural Modulus:
61,500 psi
Compression:
45,000 psi
Max Temperature:
120°F
Shrinkage
None
Please note: All data to be used as a guide only; not a specification.
Data Sheets
Product Data Sheet
Safety Data SheetShipping
Restrictions
Due to U.S. Department of Transportation Hazardous Materials regulations and International Air Transport regulations we can only ship this product by domestic ground service within the contiguous United States.