EZ-Lam High Temperature Epoxy Resin - Short Shelf Life

(0) No Reviews yet
$81.80 to $190.20
1 +$115.50 - $319.00
1 +$81.80 - $190.20



EZ-Lam High Temperature Epoxy Resin is a two part, high temperature curing laminating system specially formulated for construction of high strength, high temperature composite parts. Its low viscosity offers excellent wet out characteristics and it is bondable to all fabrics including, fiberglass, carbon fiber, aramid (Kevlar®), core materials, wood and metal.

When combined, the mixture provides a pot life of four hours at 75°F. The resin must undergo room temperature set for 24-48 hours at 75°F, followed by a tiered post cure cycle, starting at 150°F and ending at 350°F. Allow the part to cool in the oven prior to removal. The maximum operating temperature is 450 °F.

The resulting laminate will cure to a hard, high strength gloss finish that can be easily sanded.

  • Available Sizes: Quart, Gallon
  • Shipping: Domestic Shipping via Ground Only
Quart Kit Lot 110221-6/110211-7, Expires 11/30/2022
Gallon Kit: Lot 110221-6/110221-7, Expires 11/2/2022

KEVLAR® is a registered trademark of E.I. du Pont de Nemours and Company and is used with permission.


Physical Properties
Mix Ratio:
Weight: 100 parts EZ-Lam A to 32 parts EZ-Lam B
Pot Life:
150 gr. mass 4 hours @ 75°F
Gel Time:
3-4 Hours
  • Room Temp Set 24-48 Hours @ 75 followed by
  • 2 Hrs. @ 150°F
  • 2 Hrs. @ 250°F
  • 2 Hrs. @ 300°F
  • 2 Hrs. @ 350°F and allow to cool
Shelf Life:
Twelve months when stored in tightly sealed containers at room temperature.
Semi Opaguqe, Amber
Technical Properties
Viscosity, Mixed:
5000 CPS
Durometer D:
94 Shore
Specific Gravity:
1.19 gm/cc
Tensile Strength:
57,000 psi
Flexural Modulus:
102,000 psi
64,000 psi
Max Temperature:
400 °F

Please note: All data to be used as a guide only; not a specification.


Due to U.S. Department of Transportation Hazardous Materials regulations and International Air Transport regulations we can only ship this product by domestic ground service within the contiguous United States.



Products sold as a clearance may be excess inventory that does not meet the stringent specifications of medical or aerospace applications, have blemishes and/or other imperfections as noted in the product descriptions. These items are sold "As Is", are nonrefundable and will not be backordered. If an ordered quantity cannot be fulfilled, we will ship available on hand quantities and automatically cancel any remaining balance.

Ratings & Reviews

No reviews available

Be the first to Write a Review