Carbon Fiber Rods -Round

(0) No Reviews yet
$2.75 to $140.00Each
Our pultruded Carbon Fiber Solid Rods are manufactured with the fibers running in a 0-degree direction which creates a stiff, lightweight rod with incredible linear strength. 
Status: Active
$2.75 to $140.00Each

Details

Description

Our Carbon Fiber Solid Rods are manufactured by a pulling continuous carbon fibers combined with a resin matrix through a heated steel forming die. This process is referred to as pultrusion and is used for producing continuous lengths of composite materials with constant cross-sections.

As the carbon fibers are saturated with the resin mixture and then pulled through a round die, the hardening of the resin is initiated by the heat from the die and a rigid, cured structure is formed in the shape and size of the die. The majority of the fibers are running in the 0 degree direction, along the length of the tube, to produce an extremely stiff and lightweight rod with a very low coefficient of expansion. This type of construction offers a high stiffness to weight ratio rod with incredible linear strength, due to the orientation of the carbon fibers, and tight outer diameter (OD) tolerances.

Our Carbon Fiber Solid Rods have a matte finish surface and are easily bondable..

Uses Include
  • Aerospace Spars & Beams
  • UAV Components
  • Frames & Supports
  • Structural Components
  • Interior Design
  • Automation Equipment
  • Recreational Equipmen
  • R/C Applications

Technical

Physical Properties
Diameter:
See Product Data Sheet
Straightness:
See Product Data Sheet
Color:
Natural Dark Gray to Black
Finish:
Matte
Composite Type:
0° unidirectional orientation
Resin Type:
See Product Data Sheet
Fiber Type:
33 to 35 MSI standard modulus carbon fiber
Fiber Volume:
See Product Data Sheet
Technical Properties

See Product Data Sheet

Please note: All data to be used as a guide only; not a specification. Sample data is measured from .156" solid round rod with a vinylester resin matrix.

Resources

Tips

Tips on how to use this product in certain applications are coming soon.

If you would like to learn more about this product, give us a call at (800) 811-2009.

Customize

Need something different? We've got you covered.

As a leading manufacturer of composite structures you can rely on us to provide rapid, cost-effective and high-quality solutions to meet and exceed your project requirements.

We MAKE it.

Our design and manufacturing team can work with you to fabricate custom rods.

  • Fiber Selection
  • Manufacturing Process
  • Layup/Construction
  • Surface Finish
  • Outer Diameters from .010" to 1.00"*
  • Lengths up to 8'*
  • Finishing

*Available size options are contingent on tooling and material availability. Minimum order quantities may apply.

We CUSTOMIZE it.
  • CNC Machining
  • Cutting
  • Slotting
  • Drilling
  • Grinding
Request a Quote

Contact us today to discuss your requirements.
Already know what your looking for?

Stock Cutting

ACP can cut stock rods and tubes to custom sizes in-house to hold tight tolerances for convenience and availability.

+/- 0.25" Tolerance
$10.00 setup fee per cut length
$1.00 per cut

+/- 0.125" Tolerance
$50.00 setup fee per cut length
$1.00 per cut

Higher Tolerance
Call 1-800-811-2009 for quote

Ratings & Reviews

No reviews available

Be the first to Write a Review