Carbon Fiber High Gloss Woven Sheets

(0) No Reviews yet
$13.00 to $635.00Each
ACP's High Gloss Twill Carbon Fiber Sheet provide a mirror-like finish ideally used in high-end decorative projects. Our proprietary Autoclave curing process produces consistent, high quality sheets every time.
Status: Active
$13.00 to $635.00Each

Details

Description

ACP’s High Gloss Twill Carbon Fiber Sheet is an outstanding decorative laminate with a deep, glossy, three dimensional finish. It is constructed with layers unidirectional carbon fiber prepreg layed up in a 0/90 degree orientation with a single layer of 2x2 twill carbon fiber prepreg on each of the outside surfaces. This type of construction produces a decorative laminate that has the classic carbon fiber look but with greater strength and stiffness than to our Unidirectional Carbon Fiber Sheets.

The carbon fiber sheet is semi-flexible, yet remains stiff like cardstock. It can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces. One side features our recognized high gloss finish while available options for the opposite side include a high gloss, matte or adhesive backed finish.

Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.

These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.

Uses Include
  • Decorative Applications
  • Dashboards
  • Radio face plates
  • Guitars
  • Instrument panels
  • License plate holders
  • Clip boards
  • Door panels

Technical

Physical Properties
Thickness:
.008" +/-.003"
Material:
2x2 Twill Weave Carbon Fiber Prepreg
Layup Construction:
Single Layer
Finish:
Gloss/Matte, Gloss/Adhesive


Thickness:
.023" and thicker +/-15%
Material:
Unidirectional Carbon Fiber Prepreg
2x2 Twill Weave Carbon Fiber Prepreg
Layup Construction:
0/90° Unidirectional Layup
Single layer Twill on outer surface
Finish:
Gloss/Matte, Gloss/Gloss


Width:
+/-0.25"
Resin Matrix:
Epoxy with Built in UV Inhibitor
Fiber Volume:
60-65%
Technical Properties
Tensile Strength:
266 ksi
Tensile Modulus:
18.3 msi
Tensile Strain:
10,370
Compressive Strength:
193 ksi
Compressive Modulus:
16.5 msi

Please note: All data to be used as a guide only; not a specification.

Resources

Tips

Tips on how to use this product in certain applications are coming soon.

If you would like to learn more about this product, give us a call at (800) 811-2009.

Customize

Need something different? We've got you covered.

As a leading manufacturer of composite structures you can rely on us to provide rapid, cost-effective and high-quality solutions to meet and exceed your project requirements.

We MAKE it.

ACP manufacturers Carbon Fiber High Gloss Woven Sheets in-house and can customize this product to your specifications. ACP's Woven Sheets are stocked in standard sheet sizes up to 24" x 48". Customizable options are available on a special order basis.

  • Fiber Selection
  • Thickness
  • Layup/Construction
  • Surface Finish
  • Size​s up to 60" x 120"
  • Finishing

*ACP has a maximum work envelope of 60" x 120". Available options are contingent on tooling and material availability.


We CUSTOMIZE it.

Finishing Services Include:

  • Bonding
  • CNC Machining
  • Clear Coating
  • Countersinking
  • Cutting
  • Painting
  • Silk-Screening
Request a Quote

Contact us today to discuss your requirements.
Already know what your looking for?

Ratings & Reviews

No reviews available

Be the first to Write a Review