1.50" ID x 1.624" OD x 70" Carbon Fiber Twill Roll Wrapped Tube

ACP’s Carbon Fiber Twill Roll Wrapped Tubes are manufactured by wrapping carbon fiber unidirectional prepreg tape onto a mandrel in multiple layers and orientations and cured at high temperatures and pressure.

The unidirectional layers are oriented in a 0/90 degree orientation with the majority of the fibers positioned in the longitudinal access. Fibers oriented at 90 degrees (hoop) are wrapped around the circumference to provide high crushing strength and stiffness. The fibers that run along the length, in the 0 degree direction, provide high bending strength and stiffness. This type of construction offers a high stiffness to weight ratio tube with increased bending stiffness and axial strength, a high crush resistance and tight inner diameter (ID) tolerances.

Carbon Fiber Twill Roll Wrapped Tubes have an outermost layer of 2x2 twill fabric which gives the tube a few advantages including better machinability, reduced splintering and the decorative aesthetics associated with carbon fiber. All of our roll wrapped tubes feature a slight rib texture spiraling along their length where shrink-tape has been used in the manufacturing process. If needs be, this can easily be sanded and polished away.

Tips on how to use this product in certain applications are coming soon.

If you would like to learn more about this product, give us a call at (800) 811-2009.

The Do's and Don'ts of Cutting Composite Tubes and Rods

Our design and manufacturing team can work with you to fabricate custom tubes and rods.

• Hardware/Components

• Fiber Selection
• Manufacturing Process
• Layup/Construction
• Surface Finish
• Outer Diameters from .250" to 3.00"*
• Lengths up to 8'*
• Finishing

• CNC Machining
• Cutting
• Slotting
• Drilling
• Grinding

Contact us today to discuss your requirements.
Already know what your looking for?

ACP can cut stock rods and tubes to custom sizes in-house to hold tight tolerances for convenience and availability.

+/- 0.25" Tolerance
$10.00 setup fee per cut length
$1.00 per cut

+/- 0.125" Tolerance
$50.00 setup fee per cut length
$1.00 per cut

Higher Tolerance
Call 1-800-811-2009 for quote

Products sold as a clearance may be excess inventory that does not meet the stringent specifications of medical or aerospace applications, have blemishes and/or other imperfections as noted in the product descriptions. These items are sold "As Is", are nonrefundable and will not be backordered. If an ordered quantity cannot be fulfilled, we will ship available on hand quantities and automatically cancel any remaining balance.